VisionTek PoE Injector - 24 Port Active with two 56 volt 120 watt power supplies

AT 24 Port 56 Volt 240 Watt

Active PoE Injector for High Powered Devices

Power High Powered Devices like Cisco WiFi APs, PTZ Cameras and more. This 802.3af/at compliant Power over Ethernet (PoE) injector takes power from the DC power source and adds it to a Cat5, Cat5e, or Cat6 Ethernet data cable to power your PoE devices.

Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices. Power is only added to the data cable when an 802.3af or 802.3at device is connected.

Key Features

• Instantly upgrade your network switch to IEEE 802.3at PoE+
• 24 PoE + Data Ports
• Active negotiation protects non-PoE Devices
• 10/100/1000 Gigabit Data capability
• 30 Watt output per port with Max 240 watts shared total
• Includes two UL approved 56v 120w power supplies
• 2.1 DC power connector
• 1U Rackmountable injector

• Active PoE Injector for High Powered Devices
• 2 x 56 Volt 120 Watt Power Supplies

• LEDs Per Port: 1
• Max. Amps Per Port: 650mA
• Operating Humidity: 5% to 90%
• Operating Temperature Range: -10 - 60C
• PoE Configurable Per Port: No
• PoE Method: Active
• PoE Mode/Pinout: Mode A (-1,2 +3,6)
• Power Input: 2.1 mm DC and Phoenix Connector 1840382

• Cisco WiFi APs
• PTZ Cameras