INJ 1110-T POE INJECTOR 60W POE 2 X 10/100/1000BASE-T XT

INJ 1100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-1100-T units are also protected against short circuits on the PoE side.

Generating up to 60 Watts, the INJ 1100-T provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power).

With the INJ 1100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.

• 24 V DC
• 48 V AC

• IEEE 802.3bt
• IEEE 802.3af
• IEEE 802.3at
• CE
• UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4
• Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4
• Class I, Division 2, Groups A, B, C, D
• CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
• EMC Directive 2014/30/EU
• EN 60068-2-6/IEC 60068-2-6
• EN 60068-2-27/IEC 60068-2-27
• EN 61000-4-2
• EN 61000-4-3
• EN 61000-4-5
• EN 61000-6-4
• EN 61000-4-6
• UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4

• Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
• China Restriction of Hazardous Substances (China RoHS)