IRG5541+ LTE-A PRO 600M ROUTER 4X ETHERNET GPIO PWR WIFI ANT

Perle IRG5500 LTE Routers and Gateways have the most comprehensive set of features, functionality, and performance to provide primary or failover back-up connectivity to remote infrastructure and assets. These ultra-low-power, rugged, high-performance Cellular Routers, with dual-SIM slots, also have models with WLAN capabilities making them a single network point of contact for fast deployments. And, there is no need for training because an IRG5500 Router comes with an intuitive web GUI. For advanced admin scrips, CLI commands are also available.

Perle IRG5500 Routers provide fast, secure, and reliable managed LTE network connectivity where wired options are impossible to deploy or require a backup. This is crucial for enabling a wide range of applications while ensuring the highest degree of security to protect the integrity of critical services. Reduce the cost of downtime and service calls, and bringing distributed sites online faster. With support for Data, SMS, Voice, and Video, an IRG5500 and can be integrated into any enterprise cloud, building, industrial, or mobile location network infrastructure.

• Building and process automation controllers, Internet of Things (IoT)
• Smart grid assets (meters, switches, controllers), Telco infrastructure controllers
• SCADA, Distribution management systems, Remote data loggers, flow meters, sensing equipment
• Digital signage, ATMs, POS, Kiosks, Temporary "pop-up" stores
• Video surveillance controllers, IP cameras, Mobile hotspots
• Fleet management, GPS/GNSS Location tracking, Taxis, Public Service Vehicles, vehicle area networking (VAN)
• Public Service Vehicles, First responders, Command Centers
• Transit systems, Buses, Metro Subways, Railways

Cellular Band Operation Certified Worldwide over 4G LTE, DC-HSPA+, HSPA+, HSPA, and UMTS (WCDMA)

Perle IRG5500 Routers and Gateways have three cellular options to ensure support for your carrier's primary bands in deployment areas:

• IRG5500+: LTE-A PRO CAT12. 600Mbps downlink and 150Mbps uplink speeds. Support for 24x LTE Bands and 9x UMTS/WCDMA Bands
• IRG5500: LTE-A CAT6. 300Mbps downlink and 50Mbps uplink speeds. Support for 15x LTE Bands and 6x UMTS/WCDMA Bands
• IRG5500+ FN: FirstNet Ready™ support for Band 14 (B14). LTE-A PRO CAT12. 600Mbps downlink and 150Mbps uplink speeds. Support for 24x LTE Bands and 8x UMTS/WCDMA Bands

• LTE 2100
• LTE 1900
• LTE 1800
• LTE 850
• LTE 2600
• LTE 900
• LTE 700
• LTE 800
• LTE 2300
• WCDMA 2100
• WCDMA 1900
• WCDMA 1800
• WCDMA 900
• WCDMA 850

• HSPA
• HSPA+
• DC-HSPA+
• UMTS
• LTE Advanced Pro

• WEP
• WPA-PSK
• WPA2-PSK
• AES
• EAP
• PEAP
• LEAP

• Panel-mountable
• DIN Rail Mountable
• Desktop
• Wall Mountable

• IRG5541+ Modem/Wireless Router
• Power Supply
• WLAN Antennas

• FCC/ICES
• RED
• PTCRB/CTIA
• CE
• SAE J1455
• MIL-STD-810G
• EN 61373
• IECEx/IECx, ATEX/Ex Class 1 Zone 2, Directive 2014/34/EU
• ANSI/ISA 12.12.01, Class 1 Division 2 Groups A-D, ISA 12.12.01-2015
• E-Mark (UN ECE Regulation 10.04, ISO 7637-2:2011 and ISO 16750-2:2012 )
• EN 50155: 2017 Clause 4.3.6
• EN 50121-1: 2017
• EN 50121-3-2: 2016
• EN 50121-4: 2016
• IEC 60571:2012 For Clause 12.2.8 & 12.2.9
• IEC 62236-1: 2018
• IEC 62236-3-2: 2008
• IEC 62236-4: 2018
• FCC 47 Part 15 Subpart B, Class B
• ICES-003 Issue 6 Class B (Canada)
• FCC Part 15.247 Subpart C ( 2.4 Ghz)
• FCC Part 15.407 Subpart E ( 5 Ghz)
• ANSI C63.4 Class B (Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz)
• EN61000-3-2: 2014 (Limits for Harmonic Current Emissions)
• EN61000-3-3: 2013 (Limits of Voltage Fluctuations and Flicker)
• CISPR 32:2015/EN 55032:2015 Class B (Electromagnetic compatibility of multimedia equipment - Emission requirements)
• CISPR 25:2016/EN55025: (Vehicles, boats and internal combustion engines - RDC)
• CISPR 35:2016/EN 55035:2017 (IR)
• EN 61000-4-2:2009 (ESD)
• +/-8 kV (Contact)
• +/-15 kV (Air)
• Operating mode: powered on
• EN 61000-4-3: 2006 + A1:2007 + A2:2010(RS)
• EN 61000-4-4:2012 (EFT) 2 KV (Criteria A)
• EN 61000-4-5:2014+AMD1:2017 (Surge) 2KV (line to earth), 1.5KV (line to line)
• EN 61000-4-6: 2013 (CS)
• EN 61000-4-8: 2009 (PFMF)
• EN 61000-4-9: 2016 (PMF)
• EN 61000-4-11: 2004 + A1:2017
• EN 61000-4-16
• EN 61000-6-4: 2007 + A1: 2011
• ISO 7637-2:2004
• UL/IEC 61010-1
• UL/IEC 61010-2
• UL/EN/IEC 62368-1 (previously 60950-1)
• CAN/CSA C22.2 No. 62368-1
• EN 300 328 (V2.1.1:2019), ETSI EN 300 328 V2.1.1 (2016-11) (Electromagnetic compatibility)
• EN 301 893 (V1.8.1:2015), ETSI EN 301 893 V2.1.1 (2017-05) (Radiated spurious emissions)
• EN 301 489-1 (V2.1.1:2017-02), ETSI EN 301 489-1 V2.1.1 (2017-02)
• EN 301 489-17 (V3.2.0:2017-03), ETSI EN 301 489-17 V3.1.1 (2017-02)
• EN 301 489-19 (V2.1.1:2019)
• EN 301 908-1 v11.1.7:2018-12, ETSI EN 301 908-1 V7.1.1 (2015-03) (Radiated emissions RF control and monitoring)
• EN 301 908-2 v11.1.2:2017-08, ETSI EN 301 908-2 V11.1.2 (2017-08) (RF conducted)
• EN 301 908-13 v11.1.2:2017-07, ETSI EN 301 908-13 V11.1.2 (2017-07) (RF Conducted)
• EN 62311:2019, IEC 62311 Ed. 1.0 b:2007 (Human exposure restrictions for radio frequency electromagnetic fields)

• Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
• Restriction of Hazardous Substances (RoHS) 3
• Waste Electrical and Electronic Equipment Directive (WEEE)