HPE ANW AP-635 US 5PK CAMPUS AP PL-VL

Advantages of 6 GHz Wi-Fi 6E provides up to 1200 MHz in the 6 GHz band for higher throughput and improved application performance. With up to seven 160 MHz channels, Wi-Fi 6E can better support low-latency, bandwidth hungry applications like high-definition video and artificial reality/virtual reality applications. Only Wi-Fi 6E capable devices can use the 6 GHz band so there is no interference or slowdowns due to legacy devices. Device class supportHPE Aruba Networking 630 Series APs are part of the low power indoor (LPI) device class. This fixed indooronly class uses lower power levels and does not require an Automated Frequency Coordination service (AFC) to manage incumbent outdoor services which is required for standard class APs. The connectorized models will typically operate as Standard Power access points, but may also be allowed to operate as Low Power Indoor devices in some countries. Less interferenceHPE Aruba Networking 630 Series Access Points include HPE Aruba Networking's ultra tri-band filtering, which enables enterprises to take advantage of the high end of 5 GHz with the lower end of 6 GHz without experiencing interference. Since there is only 50 MHz between 5 GHz and the 6 GHz, without advanced filtering, enterprises would likely experience problems between the bands and would therefore be limited in the number of channels available. By applying advanced filtering capabilities, enterprises can take full use of available spectrum without creating coverage gaps or islands. Business continuityThe HPE Aruba Networking 630 Series APs provide high availability with two HPE Smart Rate ethernet ports for hitless failover for both data and power. Configurable to 1 or 2.5 Gbps, these dual ports provide business continuity for mission critical applications. Global readinessWhile the need for more Wi-Fi capacity is recognized across the globe, countries are approaching 6 GHz differently. The HPE Aruba Networking 630 Series APs are set up to automatically update regulatory rules once 6E regulations have been approved and certified. Extend the benefits of Wi-Fi 6The HPE Aruba Networking 630 Series APs are based on the 802.11ax standard, which means that all its efficiency and security enhancements are also available on the 6 GHz band. Wi-Fi 6 features such as Orthogonal Frequency Division Multiple Access (OFDMA), BSS coloring etc. are fully supported on HPE Aruba NetworkingWi-Fi 6E access points as well.Packaged Quantity5Product TypeWireless Access PointTechnical InformationWireless LAN StandardIEEE 802.11 a/b/g/n/ac/axBluetooth StandardBluetooth 5Network BandTri BandFrequency Band

• 2.40 GHz
• 5 GHz
• 6 GHz

Indoor/OutdoorIndoorWireless Transmission Speed3.90 Gbit/sMIMO TechnologyYesBeamforming TechnologyYesData EncryptionYesEncryption Standard

• WPA
• WPA2
• WPA3
• WPA3-ENT
• WPA3-SAE
• WPA3-CNSA
• WPA2-ENT
• WPA-ENT
• WPA2-SAE

AI-poweredYesInterfaces/PortsEthernet Technology

• 2.5 Gigabit Ethernet
• Gigabit Ethernet

Number of Network (RJ-45) Ports2PoE PD PortYesUSBYesUSB StandardUSB 2.0 Type AManagement PortYesNetwork & CommunicationWi-Fi GenerationWi-Fi 6EPower DescriptionPower Consumption8.70 WPhysical CharacteristicsForm FactorCeiling MountableAntenna Form FactorInternalHeight2"Width8.7"Depth8.7"Weight (Approximate)2.87 lbMiscellaneousCertifications & Standards

• FCC/ISED
• CE Marked
• RED Directive 2014/53/EU
• EMC Directive 2014/30/EU
• Low Voltage Directive 2014/35/EU
• UL/IEC/EN 62368-1
• EN 60601-1-1
• EN60601-1-2
• UL2043 Plenum Rating
• 802.3at
• 802.3af
• 802.3bz
• 802.3az

WarrantyLimited WarrantyLifetime