Black Box G.703 Balun - 75-120-ohm, 2.048 Mbps, Female

G.703 7-120 ohm Balun 2.048 Mbps, Female. Features transformer isolation for protection against ground loops. Models support 2.048-Mbps Use G.703 75-120-ohm Adapters to connect your G.703 network to your shielded twisted-pair equipment. These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.

Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too. Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.

The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors. The G.703 75 - 120-ohm High-Speed Adapters support data rates to 8 Mbps.

These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.

Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too.

Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.

The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors.

The G.703 75-120 High-Speed Adapters support data rates to 8 Mbps.